Master Bedroom & Walk-In Closet Renovation – West Grey Remodel

Master Bedroom

Mar 30

jcb and sons carpentry millwork cabinetry contractor builder general contractor kitchen bathroom closet renovator reno remodel renovation west grey bruce county durham owen sound hanover walkerton mount forest hardwood flooring

This West Grey home—located near Hanover—underwent a full master bedroom and walk-in closet renovation led by JCB & SONS. We removed a dividing wall to create a larger, more functional bedroom layout, finished the ceilings with a level 5 drywall skim coat, and installed 3/4” maple hardwood flooring for a clean, modern look. The custom walk-in closet features built-in cabinetry, wardrobe storage, drawers, and mirror-faced doors—all made in-house for a seamless fit. As part of the upgrade, we also managed the installation of a new high-efficiency furnace, complete with ductwork and HRV system, improving both comfort and air quality throughout the home. This project reflects our approach to whole-room renovation, blending custom millwork with quality craftsmanship and efficient general contracting.

All of the Cabinets were full 3/4" Plycore Maple Veneer Construction.

The face frames were all built using a very traditional mortise and tenon joint. Making a very durable quality connection of the styles and rails.

These are the Tenons that will make the connection with all the mortises.

All of the drawer boxes were made using soft maple and blind dovetails cut onsite at our shop.

We used all solid Hard Maple for the face frames and classic styled raised panel doors which were also all milled and built in our shop.

Milling the styles and rails on our spindle molder.

The completed cabinets where than sprayed with 3 coats of Lacquer to provide a very high quality durable finish.

These 8' Maple mirrored doors were installed on high quality Johnson hardware and glide effortlessly as sliding doors should.

We also built a completely maple wardrobe to be part of all the cabinets and create some fantastic hanging storage with adjustable wire rack shelving.

All of the shelving received solid maple nosing verses the typical edgebanding you see on cabinet shelving.

The drywall beam used to support the ceiling after removing a dividing wall was a great place to use some Trim Tex Step-A-Bull Corner beads for a great detail.